HP Envy 4520 Driver Wireless Setup

You can complete more tasks in less time with the HP Envy 4520 e-all-in-one printer’s capabilities and small size. Even if you don’t have access to a network, you can start printing and connecting right away with a quick setup from your IOS or Android smartphone, tablet, or PC. You may print, scan, or copy using the 2.2′′ display on the HP Envy 4520 printer. From the convenience of your home, print borderless, lab-quality photos, documents, scrapbook pages, and more. You may print from anywhere with the output tray that deploys automatically. Automatic two-sided printing allows you to conserve resources and paper. Use the optional quiet mode to lower sound to prevent annoyances. Elegant and portable, this HP Color printer fits anywhere you need it to. With the help of this HP Envy 4520 Wireless Printer Manual, you can set up your printer and finish installing the ink and drivers.

1. Manual for the HP Envy 4520 printer

Before utilizing the printer, users must complete the HP Envy 4520 Setup. It can occasionally be difficult to connect your HP Envy 4520 printer to your computer, though. The HP Envy 4520 E-All-In-One Printer Manual contains all the instructions users will need to manually configure the HP Envy 4520 Wireless Setup. The HP Envy 4520 Wireless Setup procedure will be mostly guided by these instructions. To successfully complete the HP Envy 4520 Printer Setup process, the user must attentively study the HP Envy 4520 handbook.

2. How to installation and Replace HP Envy 4520 Ink

Complete the installation of your HP Envy 4520 Printer Ink by following the steps provided below:

  • Turn on the printer.
  • Be sure to feed the printer with plain white paper.
  • Gently grab the knobs on either side of the printer and lift the ink cartridge access door until it locks into place.
  • The carriage is positioned in the middle of the printer.
  • Wait until the carriage is silent and unoccupied before continuing.
  • To release the ink cartridge, lift the cover on the slot. Then, gently press the lid back until it stops.
  • Pull up on the ink cartridge to remove it from the slot.
  • Select one ink cartridge from the box of new ink. Make sure you only contact the black plastic of the ink cartridge.
  • Before continuing, wait for the printer to expel the alignment page.
  • Take off the scanner’s lid.
  • Place the alignment page’s print side down on the scanner’s glass. Please align it with the engraved guides to place it in the center of the glass.
  • After closing the scanner cover, press OK.

3. Mac Wireless Printer Setup For Hp Envy 4520

Follow these steps to connect your HP Envy 4520 printer to wifi on a Mac:

  • Make sure your Mac is turned on, as well as the HP Envy 4520 printer.
  • On the control panel of the printer, click the Wireless icon.
  • Choose the settings option from the printer’s main menu.
  • Click Wireless Setup Wizard and type the name of the wireless network you like.
  • From the list of available networks, choose the wireless network that you prefer.
  • Check to see if your Mac and printer are both connected to the same network.
  • Enter the password for your wifi network.
  • Delay till the connection is confirmed.
  • File a test page for printing.

4. Wireless HP Envy 4520 Printer for Windows

To connect your HP Envy 4520 wireless printer to wifi on a Windows desktop, follow the steps below:

  • Check that both your Windows device and your HP Envy 4520 printer are turned on.
  • Utilize the setup package from the official HP website or download the printer driver for the HP Envy 4520.
  • Open the driver file that was downloaded to complete the installation.
  • Type “Control Panel” into the search bar on the Windows menu.
  • On the control panel window, select the “Device and Printer” option.
  • Click the drop-down menu and choose “Add Printer”.
  • Select your HP Envy printer from the list that appears.
  • From the drop-down box, choose Add a Wireless Printer Network.
  • Confirm that your printer’s WLAN function is switched on.
  • Tap on next to start the driver installation.
  • After downloading the driver, you must connect a wifi network with your printer.
  • Confirm that your Windows device is connected into the identical wireless network.
  • The HP Envy 4520’s wireless Windows installation is now complete.

5. Download the HP Envy 4520 printer driver

Follow the steps below to finish downloading the Hp Envy 4520 Printer Driver. You may complete the printer drivers for your HP Envy using one of two methods:

Method 1: install HP Envy 4520 drivers through CD.

  • Confirm that both your PC and the HP Envy printer are turned on.
  • Place the HP Envy 4520 driver setup CD into the CD drive of your computer.
  • Start the CD setup wizard and follow the instructions displayed on the screen.
  • You’ll be requested to connect the HP Envy 4520 USB wire to your device after a few stages of installation.
  • Connect your printer to the USB cable.
  • The printer connection will be recognized right away.
  • Now follow the download instructions displayed on-screen.

Method 2: Install printer driver without a CD

  • Start both your computer and the HP Envy 4520 printer.
  • Make sure the USB cord from your printer is unplugged.
  • Go to the official HP website and run the setup file for the HP Envy 4520 driver.
  • Once the download is finished, launch the driver file.
  • Start the setup wizard and follow to the prompts on the screen.
  • You will be requested to connect the HP Envy 4520 USB printer wire to your device after a few installation stages.
  • Connect your USB cord when requested.
  • The printer connection will be recognized right away.
  • Now follow the on-screen instructions to complete the download.

6. HP Envy 4520 wifi setup

Follow the instructions below to finish setting up your HP Envy 4520 printer and discover how to connect to it wirelessly.

  • When you’re unpacking your HP printer, make sure to switch it on.
  • Click the wireless button on the control panel of the printer.
  • From the wifi settings menu, choose OK.
  • Click OK once the Setup Wizard window has appeared.
  • After the printer has finished searching the area, it will display any nearby wifi networks that are accessible.
  • Select your desired wireless network from the list of accessible wifi networks.
  • Press OK after choosing your wifi network.
  • Enter the password for your wifi network.
  • A success message will show up once the printer is connected; click OK.
  • Your wifi setup is complete.

7. WiFi Setup for the HP Envy 4520 Printer

Follow the steps below to setup your HP Envy 4520 printer to connect to wifi:

  • After completing the HP Envy 4520 wifi setup, gather all the required wireless network network.
  • Click the Settings button next to the wifi icon in your printer’s Control Panel.
  • Click on the wireless settings menu item.
  • Click the wireless set up wizard after selecting the wireless settings.
  • Enter your router’s network credentials, including the network name and password.
  • Create and validate the connection.

8. Hardware and software setup for the HP Envy 4520

Follow the instructions below to set up the hardware and software on your HP Envy 4520:

  • Remove the printer’s box.
  • Remove the printer’s protective tape and any packaging items.
  • Remove the printer’s protective tape.
  • Close the cartridge door for the HP Envy 4520.
  • Plug the printer into an electrical outlet, switch it on, and then set the preferences.
  • Connect the printer’s power cord to the printer’s back and connect it into a socket.
  • To switch the printer on, press the Power button.
  • Choose your favorite language and then select Yes on the printer’s control screen.
  • Click Yes after choosing your nation or area.
  • Stuff the input tray with A4 paper.

Slide the paper width guidelines in until they rest against the sides of the paper, then return the tray to its initial position.

  • Open the door that leads to the HP Envy 4520 cartridges in order to access them.
  • Place the HP Envy 4520 ink cartridge in its corresponding slot and press firmly down until it clicks into place.
  • Click on the Setup option on the home screen, then select Tools.
  • After that, click the Down Arrow to access Align Printer.
  • After opening the printer, place the orientation page print side down in the upper right corner of the scanner glass.
  • Aligning the scanner glass and the alignment sheet
  • Go to the HP website and download the correct printer driver.
  • Open the setup file for the printer driver.
  • To complete the installation, adhere to the instructions on the screen.