HP Envy 5014 Wireless Setup on mac and Windows

You can start printing from your HP Envy 5014 and set up the wifi in less than a minute. You can trust your connection thanks to dual-band wifi Scan on the Go’s consistent performance. You can easily order ink with the HP Smart app and print from social media and the cloud. With the help of your HP Envy 5014 e-all-in-one printer, you can quickly print from a variety of smartphones and tablets. With the HP Envy e-all-in-one 5014 printer, you can print borderless photos and flyers in the comfort of your own home. With the help of this HP Envy 5014 Wireless Printer Manual, you can configure your printer and finish installing the necessary drivers and ink.

1. Manual for the HP Envy 5014 printer:

Before utilizing the printer, users must complete the HP Envy 5014 Setup. It can occasionally be difficult to connect your HP Envy 5014 printer to your computer, though. The HP Envy 5014 E-All-In-One Printer Manual contains all the instructions users will need to manually configure the HP Envy 5014 Wireless Setup. These instructions will serve as the main direction for the HP Envy 5014 Wireless Setup procedure. To successfully complete the HP Envy 5014 Printer Setup process, the user must attentively study the HP Envy 5014 handbook.

2. Installation and Replacement of HP Envy 5014 Ink:

Complete the installation of your HP Envy 5014 Printer Ink by following the steps provided below:

  • Press the Power button to turn on the printer if it isn’t already on.
  • Take off the scanner’s lid.
  • Open the cartridge access door to gain access to the cartridges.
  • The carriage advances to the access point for the cartridge. Wait until the carriage is silent and unoccupied before leaving.
  • Pull the cartridge slot cover and gently push it back until it stops to remove the cartridge.
  • Pull the cartridge up from the slot to remove it.
  • After removing the new cartridge from its container, pull the pull button to unwind the plastic tape.
  • Insert the cartridge into the vacant slot, holding it at an upward angle with the connectors towards the back of the printer.
  • If necessary, install the last cartridge by repeating the previous steps.
  • Close the door to prevent access to the cartridges.
  • Shut the lid of the scanner.
  • Follow the instructions on the control panel to follow the cartridge alignment.

3. Mac Wireless Printer Setup for the HP Envy 5014

Follow these steps to connect your Mac’s HP Envy 5014 printer to wifi:

  • Check to see if your Mac and HP Envy 5014 printer are both turned on.
  • From the printer’s control panel, click the Wireless icon.
  • Choose the appropriate settings from the printer’s main menu.
  • Click Wireless Setup Wizard in the drop-down menu, and then type the name of the wireless network you want to use.
  • Select your preferred wireless network from the list of available networks.
  • Confirm that your Mac and printer are connected to the same network.
  • Enter the wifi network’s password.
  • Await confirmation of the connection.
  • Produce a practice page.

4. Wireless HP Envy 5014 Printer for Windows

To connect your HP Envy 5014 wireless printer to wifi on a Windows desktop, follow the steps below:

  • Confirm that your Windows device and the HP Envy 5014 printer are both turned on.
  • Use the Setup file or download the printer driver for the HP Envy 5014 from the manufacturer’s website.
  • To finish the installation, run the driver file that was downloaded.
  • Type “Control Panel” into the search type on the Windows menu.
  • Click “Device & Printer” in the control panel window.
  • Select “Add Printer” from the drop-down menu.
  • Select your HP Envy printer from the list that is displayed.
  • Make the decision to Add a Wireless Printer Network from the drop-down option.
  • Confirm that the WLAN function on your printer is turned.
  • The driver installation will start after you click Next.
  • You must connect your printer to a wireless network after downloading the driver.
  • Confirm that your Mac and Windows device are connected to the same wireless network.
  • The HP Envy 5014 wireless Windows installation is now complete.

5. The Best steps to Download the HP Envy 5014 Printer Driver

Follow the steps below to finish downloading the Hp Envy 5014 Printer Driver. You may complete the printer drivers for your HP Envy using one of two methods:

Method 1: Install HP Envy 5014 drivers by using a CD.

  • Start your computer and HP Envy printer.
  • Place the HP Envy 5014 driver setup CD into the CD drive on your computer.
  • Start the CD setup wizard and follow to the instructions on the screen.
  • After a few stages of installation, you will be asked to connect the HP Envy 5014 USB wire to your device.
  • Join the USB cable to your printer.
  • The printer connection will be immediately detected.
  • Now follow to the download instructions displayed on the screen.

Method 2: Install the printer driver without a CD.

  • Start your computer and the HP Envy 5014 printer.
  • Confirm that the USB cable from your printer is unplugged.
  • Download the setup file for the HP Envy 5014 driver from the manufacturer’s website.
  • After the driver file has finished downloading, open it.
  • Open the setup wizard and follow to the instructions on the screen.
  • After a few stages of installation, you will be asked to connect the HP Envy 5014 USB printer cord to your device.
  • When requested, plug in your USB cord.
  • The printer connection will be immediately detected.
  • To finish the download, adhere to the on-screen instructions.

6. HP Envy 5014 wifi setup

Follow the steps below to complete the HP Envy 5014 printer setup and learn how to connect to HP Envy 5014 Wireless Printer:

  • Eliminate the printer’s packing.
  • Follow the HP Envy 5014 setup instructions to remove the package.
  • Place the print cartridges in the printer, switch it on, and install the power cord. Let the printer complete producing an alignment page as part of its startup process.
  • Both your printer and wireless router must support the WPS pushbutton mode. Consult the user manuals for your wireless router and printer.
  • The wireless router must have a physical WPS push button.
  • Your network must use WPA or WPA2 security. Most WPS wireless routers won’t connect using the WPS method if WEP or security is not in use.
  • Most WPS wireless routers won’t connect using the WPS method if you use the manufacturer’s default settings for the network name and security.
  • To use WPS to connect your wireless printer to your wireless router, turn on the WPS pushbutton mode on your printer.
  • For instructions on how to activate WPS, consult the user guide for your printer.
  • At your router, press the WPS button within two minutes.

7. How to Connect an HP Envy 5014 Printer to WiFi

Follow the steps below to setup your HP Envy 5014 printer to connect to WiFi:

  • Be careful to turn on your HP printer when you’ve finished unpacking it.
  • Click the printer’s control panel’s wifi button.
  • Click OK in the wifi settings menu.
  • When the Setup Wizard box appears, click OK.
  • After the printer has done looking around, it will display a list of the nearby wifi networks.
  • From the list of available networks, select the wireless network you want to use.
  • Click OK after deciding on your wifi network.
  • Enter the wifi network’s password.
  • After the printer is connected, a success message will show up; click OK.
  • You have completed setting up your wireless network.

8. Hardware and software setup for the HP Envy 5014

Follow the instructions below to set up the hardware and software on your HP Envy 5014:

  • Remove the printer’s packaging.
  • Remove the printer’s packing and protective tape.
  • Remove the masking tape from the printer.
  • Close the HP Envy 5014’s cartridge door.
  • After plugging the printer in, turn it on, and then change the settings.
  • To start the printer, press the Power button.
  • Click Yes to confirm your choice of language on the printer control screen.
  • After choosing your nation or area, click Yes.
  • Securely place A4 paper in the input tray.
  • To get to the HP Envy 5014 cartridges, open the cartridge access door.
  • Set the HP Envy 5014 ink cartridge in the corresponding slot, then press firmly until it locks into place.
  • Select Setup from the home screen, then choose Tools.
  • Next, select Align Printer by using the Down Arrow.
  • After lifting the printer’s lid, place the orientation paper print side down in the right front corner of the scanner glass.
  • Visit the HP website and download the appropriate printer driver.
  • Open the installation file for the printer driver.
  • To finish the installation, follow the on-screen directions.