This guide will help you use the HP Envy 5640 Printer.The issue remained unsolved. The full-featured HP driver is available for download from the included software disc or the Official HP Website. The Guided Installer guides you through the process of configuring your printer in a WiFi or wired network connection. One of these error messages will appear if the Installer fails to recognise your printer device after selecting the connection type. The printer could not be located. Unable to locate the printer in your wireless network, Device not found, Printer not found Follow these steps to resolve Printer Setup issues.

Reboot your computer, printer, and router.

These instructions will help you disconnect your network and internet connections and restart your computer device. Unplug the router’s power supply next. Then, close all open programmes and restart the computer. Reconnect the router’s power cord; the internet activity light will now blink, indicating that the connection is active. Turn on your printer and computer now. Reinstall the HP Driver and Software to resolve the HP Envy 5640 Printer issue. The problem has not yet been identified.

Network and printer connection status

Check to see if your printer is network-ready. Open the printer’s Wireless network or settings menu and make sure the wireless signal is turned on. The wireless icon light should be on and steady. For a wired network connection, connect one end of the cable to the Ethernet port and the other end to the router’s available port. The green light should remain steady and the activity light should blink when the cable is connected. Your printer is not linked to either a guest or a host network. If your router is unable to detect a network on band 5GHz, switch to band 2.4 GHz. Hovering your mouse over the network icon displays the network name and connection status. Then, check the network connection to troubleshoot the HP Envy 5640 Printer Not Found issue.

It isn’t your network’s fault.

Connect to the Connected network if it is not yours and complete the setup.

The network signal is degraded.

Keep large metal objects and radio-emitting devices out of the way of your computer and printer, and keep them close to the router.

The network is not connected

Check the network status and make sure it is operational. Check that the network name has a check mark next to it.

An Airplane Icon

Select the Airplane icon, then exit Airplane mode before attempting to connect to a wireless network.

Scan and Print Doctor from HP

To easily identify and resolve printing and scanning issues with the HP Envy 5640 Printer, HP provides the HP Print and Scan Doctor tool. There were no outcomes found. Download and run HP Print and Scan Doctor to quickly resolve troubleshooting tasks. After installing HP Print and Scan Doctor, select your printer device from the list. If the Printer device is not listed, click Retry. By following the printer’s connection method, you can easily detect a connection problem.

Disable Firewall Software

Firewall software typically protects against threats from the outside world, but it can also disrupt printer network communication. Use the HP Print and Scan Doctor to quickly disable the firewall software to resolve the HP Envy 5640 Printer Not Found issue. Select Network, Troubleshooting firewalls, and disable the status from the HP Print and Scan Doctor Window. If the installation was successful, obtain support for firewall software that allows for security level, trusted zone, and open port communication between HP Software and websites.

Uninstall HP Drivers and Software

At times, the software installation process may be incomplete or incorrect. Disconnect the USB cable from your printer if it is connected to your computer via USB. Then, in Windows, search for and select Programs and Features from the list of results. To resolve HP Envy 5640 Printer Not Found, choose Uninstall from the list of installed programmes. Then, to remove the software, follow the on-screen instructions and restart your computer.

Software Reinstallation

Download the most recent version of full-featured software for your printer device after uninstalling the HP software. Your printer may gain new capabilities if you install the Full Feature Software. Then, turn on your printer and remove the USB cable from the printer. Go to HP Customer Support- Software and Driver Downloads to resolve HP Envy 5640 Printer issues. The issue was not identified. Select printer in the Let’s Find Your Product window, enter your printer model number, and click Submit. The Result window displays a list of compatible software for your printer device. Your operating system will then be automatically detected; you can change the default operating system if necessary. Then, from the Drivers tab, choose Download to the Full software package, followed by Basic Drivers for more driver options.